2020 (@Yonsei)
30. Umberto Berardi, Mahsa Nikafkar, Seunghwan Wi, Sumin Kim,
Experimental verification of the theoretical aging of vacuum insulated panels,
Journal of Industrial and Engineering Chemistry, In Press. (2020-00) LINK
29. Seunghwan Wi, Ji Hun Park, Young Uk Kim, Sumin Kim,
Evaluation of environmental impact on the formaldehyde emission and flame-retardant performance of thermal insulation materials,
Journal of Hazardous Materials, In Press. (2020-00) LINK
28. Umberto Berardi, Tomasz Kisilewicz, Agnieszka Lechowska, Jason Paulos, Jacek Schnotale, Sumin Kim,
Experimental and numerical investigation of the thermal transmittance of PVC window frames with silica aerogel,
Journal of Building Engineering, Accepted. (2020-00) LINK
27. Abdo Abdullah Ahmed Gassar, Geun Young Yun, Sumin Kim, Choong-Hee Han,
Energy and feasibility analysis of applying bio-based phase change materials to buildings in East Asia,
Journal of Green Building, In Press. (2020-00) LINK
26. Dimberu G. Atinafu, Seong Jin Chang, Sumin Kim,
Infiltration properties of n-alkane in mesoporous biochar: the capacity of smokeless support for stability and energy storage,
Journal of Hazardous Materials, 399, 123041. (2020-11) LINK
25. Sungwoong Yang, Seunghwan Wi, Hyun Mi Cho, Ji Hun Park, Beom Yeol Yun, Sumin Kim,
Developing energy-efficient temporary houses for sustainable urban regeneration: manufacturing homes with loess, pearlite, and vermiculite,
Sustainable Cities and Society, 61, 102287. (2020-10) LINK
24. Hyun Mi Cho, Beom Yeol Yun, Sungwoong Yang, Seunghwan Wi, Seong Jin Chang, Sumin Kim,
Optimal energy retrofit plan for conservation and sustainable use of historic campus building: Case of cultural property building,
Applied Energy, 275, 115313. (2020-10) LINK
23. Seunghwan Wi, Umberto Berardi, Sam Di Loreto, Sumin Kim,
Microstructure and thermal characterization of aerogel-graphite polyurethane spray-foam composite for high efficiency thermal energy utilization,
Journal of Hazardous Materials, 397, 122656. (2020-10) LINK
22. Younes Ahmadi, Ki-Hyun Kim, Sumin Kim, Meisam Tabatabaei
Recent advances in polyurethanes as efficient media for thermal energy storage,
Energy Storage Materials, 30, 74~86. (2020-09) LINK
21. Taewoo Lee, Seong-Ho Jang, Sungyup Jung, Sumin Kim, Young-Kwon Park, Deok Hyun Moone, Eilhann E. Kwon
CO2 Effects on catalytic pyrolysis of yard trimming over concrete waste,
Chemical Engineering Journal, 396, 125331. (2020-09) LINK
20. Jongki Lee, Seunghwan Wi, Sungwoong Yang, Sumin Kim,
Experimental study and assessment of high-tech thermal energy storing radiant floor heating system with latent heat storage materials,
International Journal of Thermal Sciences, 155, 106410. (2020-09) LINK
19. Dimberu G. Atinafu, Seong Jin Chang, Ki-Hyun Kim, Sumin Kim,
Tuning surface functionality of standard biochars and the resulting uplift capacity of loading/energy storage for organic phase change materials,
Chemical Engineering Journal, 394, 125049. (2020-08) LINK
18. Dimberu G. Atinafu, Wenjun Dong, Umberto Berardi, Sumin Kim,
Phase change materials stabilized by porous metal supramolecular gels: gelation effect on loading capacity and thermal performance,
Chemical Engineering Journal, 394, 124806. (2020-08) LINK
17. Seunghwan Wi, Man-Goo Kim, Seung-Woon Myung, Yong Kyu Baik, Kang-Bong Lee, Hea-Seung Song, Myung-Jin Kwak, Sumin Kim,
Evaluation and analysis of volatile organic compounds and formaldehyde emission of building products in accordance with legal standards: a statistical experimental study,
Journal of Hazardous Materials, 393, 122381. (2020-07) LINK
16. Hyun Mi Cho, Sungwoong Yang, Seunghwan Wi, Seong Jin Chang, Sumin Kim,
Hygrothermal and energy retrofit planning of masonry façade historic building used as museum and office: a cultural properties case study,
Energy, 201, 117607. (2020-06) LINK
15. Ji Hun Park, Beom Yeol Yun, Seong Jin Chang, Seunghwan Wi, Jisoo Jeon, Sumin Kim,
Impact of a passive retrofit shading system on educational building to improve thermal comfort and energy consumption,
Energy and Buildings, 216, 109930. (2020-06) LINK
14. Dimberu G. Atinafu, Seong Jin Chang, Ki-Hyun Kim, Wenjun Dong, Sumin Kim,
A novel enhancement of shape/thermal stability and energy-storage capacity of phase change materials through the formation of composites with 3D porous (3,6)-connected metal–organic framework,
Chemical Engineering Journal, 389, 124430. (2020-06) LINK
13. Jisoo Jeon, Ji Hun Park, Beom Yeol Yun, Seunghwan Wi, Taeyeon Kim, Sumin Kim,
Field study on the improvement of indoor air quality with toluene adsorption finishing materials in an urban residential apartment,
Environmental Pollution, 261, 114137. (2020-06) LINK
12. Avanthi Deshani Igalavithanaa, Seung Wan Choi, Pavani Dulanja Dissanayake, Jin Shang, Chi-Hwa Wang, Xiao Yang, Sumin Kim, Daniel C.W. Tsang, Ki Bong Lee,Yong Sik Ok,
Gasification biochar from biowaste (food waste and wood waste) for effective CO2 adsorption,
Journal of Hazardous Materials, 391, 121147. (2020-06) LINK
11. Beom Yeol Yun, Hyun Mi Cho, Young Uk Kim, Sung Chan Lee, Umberto Berardi, Sumin Kim,
Circular reutilization of coffee waste for sound absorbing panels: A perspective on material recycling,
Environmental Research, 184, 109281. (2020-05) LINK
10. Seunghwan Wi, Seong Jin Chang, Sumin Kim,
Improvement of thermal inertia effect in buildings using shape stabilized PCM wallboard based on the enthalpy-temperature function,
Sustainable Cities and Society, 56, 102067. (2020-05) LINK
9. Botao Liu, Ki-Hyun Kim, Vanish Kumar, Sumin Kim,
A review of functional sorbents for adsorptive removal of arsenic ions in aqueous systems,
Journal of Hazardous Materials, 388, 121815. (2020-04) LINK
8. Sungwoong Yang, Seunghwan Wi, Ji Hun Park, Hyun Mi Cho, Sumin Kim,
Framework for developing a building material property database using web crawling to improve the applicability of energy simulation tools,
Renewable & Sustainable Energy Reviews, 121, 109665. (2020-04) LINK
7. Ji Hun Park, Seunghwan Wi, Seong Jin Chang, Sumin Kim,
Analysis of energy retrofit system using latent heat storage materials applied to residential buildings considering climate impacts,
Applied Thermal Engineering, 169, 114904. (2020-03) LINK
6. Pavani Dulanja Dissanayake, Siming You, Avanthi Deshani Igalavithan, Yinfeng Xia, Amit Bhatnagar, Souradeep Gupta, Harn Wei Kua, Sumin Kim, Jung-Hwan Kwon, Daniel C.W. Tsang, Yong Sik Ok,
Biochar-based adsorbents for carbon dioxide capture: A critical review,
Renewable & Sustainable Energy Reviews, 119, 109582. (2020-03) LINK
5. Seong Jin Chang, Seunghwan Wi, Hyun Mi Cho, Su-Gwang Jeong, Sumin Kim,
Numerical analysis of phase change materials/wood-plastic composite roof module system for improving thermal performance,
Journal of Industrial and Engineering Chemistry, 82, 413-423. (2020-02) LINK
4. Beom Yeol Yun, Ji Hun Park, Sungwoong Yang, Seunghwan Wi, Sumin Kim,
Integrated analysis of the energy and economic efficiency of PCM as an indoor decoration element: Application to an apartment building,
Solar Energy, 196, 437-447. (2020-01) LINK
3. Jeonghun Lee, Seunghwan Wi, Seong Jin Chang, Jeongman Choi, Sumin Kim,
Prediction evaluating of moisture problems in light-weight wood structure: Perspectives on regional climates and building materials,
Building and Environment, 168, 106521.(2020-01) LINK
2. Seong Jin Chang, Seunghwan Wi, Seog-Goo Kang, Sumin Kim,
Moisture risk assessment of cross-laminated timber walls: Perspectives on climate conditions and water vapor resistance performance of building materials,
Building and Environment, 168, 106502.(2020-01) LINK
1. Seunghwan Wi, Sungwoong Yang, Ji Hun Park, Seong Jin Chang, Sumin Kim,
Climatic cycling assessment of red clay/perlite and vermiculite composite PCM for improving thermal inertia in buildings,
Building and Environment, 167, 106464. (2020-01) LINK
2019 (@Yonsei)
28. Jisoo Jeon, Ji Hun Park, Seunghwan Wi, Sungwoong Yang, Yong Sik Ok, Sumin Kim,
Characterization of biocomposite using coconut oil impregnated biochar as latent heat storage insulation,
Chemosphere, 236, 124269. (2019-12) LINK
27. Jisoo Jeon, Ji Hun Park, Seunghwan Wi, Sumin Kim,
Thermal performance enhancement of a phase change material with expanded graphite via ultrasonication,
Journal of Industrial and Engineering Chemistry, 79, 437-442. (2019-11) LINK
26. Abdo Abdullah Ahmed Gassar, Geun Young Yun, Sumin Kim,
Data-driven approach to prediction of residential energy consumption at urban scales in London,
Energy, 187, 115973. (2019-11) LINK
25. Hyun Mi Cho, Ji Hun Park, Seunghwan Wi, Seong Jin Chang, Geun Young Yun, Sumin Kim,
Energy retrofit analysis of cross-laminated timber residential buildings in Seoul, Korea: Insights from a case study of packages,
Energy and Buildings, 202, 109329. (2019-11) LINK
24. Jiwon Yoo, Seong Jin Chang, Seunghwan Wi, Sumin Kim,
Spent coffee grounds as supporting materials to produce bio-composite PCM with natural waxes,
Chemosphere, 235, 626-635. (2019-11) LINK
23. Hwayoung Lee, Sungwoong Yang, Seunghwan Wi, Sumin Kim,
Thermal transfer behavior of biochar-natural inorganic clay composite for building envelope insulation,
Construction & Building Materials, 223, 668-678. (2019-10) LINK
22. Hyun Mi Cho, Jongki Lee, Seunghwan Wi, Sumin Kim,
Field study on indoor air quality of wood remodeled welfare facilities for physical and psychological benefits,
Journal of Cleaner Production, 233, 197-208. (2019-10) LINK
21. Seunghwan Wi, Sungwoong Yang, Umberto Berardi, Sumin Kim,
Assessment of recycled ceramic-based inorganic insulation for improving energy efficiency and flame retardancy of buildings,
Environment International, 130, 104900. (2019-09) LINK
20. Hubdar Ali Maitlo, Ki-Hyun Kim, Vanish Kumar, Sumin Kim, Jae-Woo Park,
Nanomaterials-based treatment options for chromium in aqueous environments,
Environment International, 130, 104748. (2019-09) LINK
19. Hyun Mi Cho, Seunghwan Wi, Seong Jin Chang, Sumin Kim,
Hygrothermal properties analysis of cross-laminated timber wall with internal and external insulation systems,
Journal of Cleaner Production, 231, 1353-1363. (2019-09) LINK
18. Beom Yeol Yun, Sungwoong Yang, Hyun Mi Cho, Seunghwan Wi, Sumin Kim,
Thermal storage effect analysis of floor heating systems using latent heat storage sheets,
International Journal of Precision Engineering and Manufacturing-Green Technology, 6(4), 799-807 (2019-08) LINK
17. Sungwoong Yang, Seunghwan Wi, Ji Hun Park, Hyun Mi Cho, Sumin Kim,
Novel proposal to overcome insulation limitations due to nonlinear structures using 3D printing: hybrid heat-storage system,
Energy and Buildings, 197, 177-187. (2019-08) LINK
16. Seunghwan Wi, Sungwoong Yang, Jongki Lee, Seong Jin Chang, Sumin Kim,
Dynamic heat transfer and thermal performance evaluation of PCM-doped hybrid hollow plaster panels for buildings,
Journal of Hazardous Materials, 374, 428-436. (2019-07) LINK
15. Seong Jin Chang, Seunghwan Wi, Sumin Kim,
Thermal bridging analysis of connections in cross-laminated timber buildings based on ISO 10211,
Construction & Building Materials, 213, 709-722. (2019-07) LINK
14. Sungwoong Yang, Seunghwan Wi, Jongki Lee, Hwayoung Lee, Sumin Kim,
Biochar-red clay composites for energy efficiency as eco-friendly building materials: Thermal and mechanical performance,
Journal of Hazardous Materials, 373, 844-855. (2019-07) LINK
13. Beom Yeol Yun, Sungwoong Yang, Hyun Mi Cho, Seong Jin Chang, Sumin Kim,
Design and analysis of phase change material based floor heating system for thermal energy storage,
Environmental Research, 173, 480-488. (2019-06) LINK
12. Jongki Lee, Seunghwan Wi, Beom Yeol Yun, Sungwoong Yang, Ji Hun Park, Sumin Kim,
Development and evaluation of gypsum/shape-stabilization phase change materials using large-capacity vacuum impregnator for thermal energy storage,
Applied Energy, 241, 278-290. (2019-05) LINK
11. Su-Gwang Jeong, Seunghwan Wi, Seong Jin Chang, Jongki Lee, Sumin Kim,
An experimental study on applying organic PCMs to gypsum-cement board for improving thermal performance of buildings in different climates,
Energy and Buildings, 190, 183-194. (2019-05) LINK
10. Jisoo Jeon, Ji Hun Park, Seunghwan Wi, Sungwoong Yang, Yong Sik Ok, Sumin Kim,
Latent heat storage biocomposites of phase change material-biochar as feasible eco-friendly building materials,
Environmental Research, 172, 637-648. (2019-05) LINK
9. Seong Jin Chang, Seunghwan Wi, Jongki Lee, Sumin Kim,
Thermal performance analysis of phase change materials composed of double layers considering heating and cooling period,
Journal of Industrial and Engineering Chemistry, 72, 255-264. (2019-04) LINK
8. Ji Hun Park, Yujin Kang, Jongki Lee, Seong Jin Chang, Seunghwan Wi, Sumin Kim,
Development of wood-lime boards as building materials improving thermal and moisture performance based on hygrothermal behavior evaluation,
Construction and Building Materials, 204, 576-585. (2019-04) LINK
7. Seong Jin Chang, Seunghwan Wi, Jongki Lee, Sumin Kim,
Development of vacuum impregnation equipment and preparation of mass/uniform shape-stabilized phase change materials,
International Journal of Heat and Mass Transfer, 132, 817-824. (2019-04) LINK
6. Ji Hun Park, Jisoo Jeon, Jongki Lee, Seunghwan Wi, Beom Yeol Yun, Sumin Kim,
Comparative analysis of the PCM application according to the building type as retrofit system,
Building and Environment, 151, 291-302. (2019-03) LINK
5. Jiwon Yoo, Seong Jin Chang, Jongki Lee, Seunghwan Wi, Sumin Kim,
Numerical analysis of hygrothermal properties and behavior of Korean based cross-laminated timber (CLT) wall system to deduce optimal assemblies,
Journal of Cleaner Production, 213, 1217-1227. (2019-03) LINK
4. Sungwoong Yang, Seunghwan Wi, Jongki Lee, Jisoo Jeon, Sumin Kim,
Thermal performance evaluation of Hwangtoh board developed with styrene butadiene latex/SSPCM,
Construction and Building Materials, 200, 310-317. (2019-03) LINK
3. Ji Hun Park, Jongki Lee, Seunghwan Wi, Jisoo Jeon, Seong Jin Chang, Jae D. Chang, Sumin Kim,
Optimization of phase change materials to improve energy performance within thermal comfort range in South Korean climate,
Energy and Buildings, 185, 12-25. (2019-02) LINK
2. Jongki Lee, Seunghwan Wi, Beom Yeol Yun, Seong Jin Chang, Sumin Kim,
Thermal and characteristic analysis of shape-stabilization phase change materials by advanced vacuum impregnation method using carbon-based materials,
Journal of Industrial and Engineering Chemistry, 70, 281-289. (2019-02) LINK
1. Ji Hun Park, Yujin Kang, Jongki Lee, Seunghwan Wi, Jae D. Chang, Sumin Kim,
Analysis of walls of functional gypsum board added with porous material and phase change material to improve hygrothermal performance,
Energy and Buildings, 183, 803-816. (2019-01) LINK
2018 (@SSU)
3. Hwayoung Lee, Seong Jin Chang, Yujin Kang, Dong Ryeol Lee, Sumin Kim,
Analysis of Heating Energy Reduction of Wooden-based Korean Hanok Using Passive Houses Planning Package (PHPP),
Bioresources, 13(2), 4145-4158. (2018-05) LINK
2. Yujin Kang, Seong Jin Chang, Sumin Kim,
Hygrothermal behavior evaluation of walls improving heat and moisture performance on gypsum boards by adding porous materials,
Energy and Buildings, 165, 431-439. (2018-04) LINK
1. Seong Jin Chang, Seunghwan Wi, Su-Gwang Jeong, Sumin Kim,
Analysis on phase transition range of the pure and mixed phase change materials (PCM) using a thermostatic chamber test and differentiation,
Journal of Thermal Analysis and Calorimetry, 131, 1999-2004. (2018-02) LINK
2017 (@SSU)
11. Seunghwan Wi, Su-Gwang Jeong, Seong Jin Chang, Jongki Lee, Sumin Kim,
Evaluation of energy efficient hybrid hollow plaster panel using phase change material/xGnP composites,
Applied Energy, 205, 1548-1559. (2017-11) LINK
10. Seunghwan Wi, Su-Gwang Jeong, Seong Jin Chang, Jongki Lee, Sumin Kim,
Performance evaluation of macro-packed fatty acid ester composites using energy-efficient thermal storage systems,
Journal of Industrial and Engineering Chemistry, 55, 215-223. (2017-11) LINK
9. Jongki Lee, Seunghwan Wi, Su-Gwang Jeong, Seong Jin Chang, Sumin Kim,
Development of thermal enhanced n-octadecane/porous nano carbon-based materials using 3-step filtered vacuum impregnation method,
Thermochimica Acta, 655(10), 194-201. (2017-09) LINK
8. Young Kwon Yang, In Sung Kang, Min Hee Chung, Sumin Kim, Jin Chul Park,
Effect of PCM cool roof system on the reduction in urban heat island phenomenon,
Building and Environment, 122, 411-421. (2017-09) LINK
7. Hae-Won Min, Sumin Kim, Hee Sun Kim,
Investigation on thermal and mechanical characteristics of concrete mixed with shape stabilized phase change material for mix design,
Construction and Building Materials 149, 749-762. (2017-09) LINK
6. Seunghwan Wi, Su-Gwang Jeong, Seong Jin Chang, Jongki Lee, Sumin Kim,
Energy-Efficient Heat Storage using Gypsum Board with Fatty Acid Ester as Layered Phase Change Material,
Energy Technology 5(8), 1392~1398. (2017-08) LINK
5. Seunghwan Wi, Seong Jin Chang, Su-Gwang Jeong, Jongki Lee, Taeyeon Kim, Kyung-Won Park, Dong Ryeol Lee, Sumin Kim,
Evaluation of Toluene Adsorption Performance of Mortar Adhesives Using Porous Carbon Material as Adsorbent,
Materials, 10(8), 853-863. (2017-07) LINK
4. Su-Gwang Jeong, Seong Jin Chang, Seunghwan Wi, Jongki Lee, Sumin Kim,
Energy performance evaluation of heat-storage gypsum board with hybrid SSPCM composite,
Journal of Industrial and Engineering Chemistry, 51, 237-243. (2017-07) LINK
3. Seong Jin Chang, Yujin Kang, Seunghwan Wi, Su-Gwang Jeong, Sumin Kim,
Hygrothermal performance improvement of the Korean wood frame walls using macro-packed phase change materials (MPPCM),
Applied Thermal Engineering, 114, 457-465. (2017-03) LINK
2. Su-Gwang Jeong, Seong Jin Chang, Seunghwan Wi, Yujin Kang, Hwayoung Lee, Sumin Kim,
Development of heat storage gypsum board with paraffin-based mixed SSPCM for application to buildings,
Journal of Adhesion Science and Technology, 31(3), 297-309. (2017-02) LINK
1. Jin-Hee Song, Hye-Sun Jin, Su-Gwang Jeong, Sumin Kim, Seung-Yeong Song, Jae-Han Lim,
Empirical Validation of Heat Transfer Performance Simulation of Graphite/PCM Concrete Materials for Thermally Activated Building System,
International Journal of Polymer Science, 2017, 9 pages (2017-01) LINK
2016 (@SSU)
7. Jungki Seo, Su-Gwang Jeong, Sumin Kim, Wansoo Huh,
Improvement of Thermal Conductivity of Underlay Foam for Laminate Flooring to Reduce Heating Energy,
Bioresources, 11(4), 9059~9067. (2016-11) LINK
6. Hwayoung Lee, Su-Gwang Jeong, Seong Jin Chang, Yujin Kang, Seunghwan Wi, Sumin Kim,
Thermal Performance Evaluation of Fatty Acid Ester and Paraffin Based Mixed SSPCMs Using Exfoliated Graphite Nanoplatelets (xGnP),
Applied Sciences, 6(4), 106-115. (2016-04) LINK
5. Seong Jin Chang, Seunghwan Wi, Su-Gwang Jeong, Sumin Kim,
Thermal performance evaluation of macro-packed phase change materials (PCMs) using heat transfer analysis device,
Energy and Buildings, 117, 120~127. (2016-04) LINK
4. Hyun Jeong Seo, Sumin Kim, Wansoo Huh, Kyung-Won Park, Dong Ryeol Lee, Dong Won Son, Yong-Shik Kim,
Enhancing the flame-retardant performance of wood-based materials using carbon-based materials,
Journal of Thermal Analysis and Calorimetry, 123, 1935~1942. (2016-03) LINK
3. Su-Gwang Jeong, Seong Jin Chang, Seunghwan Wi, Yujin Kang, Jae-Han Lim, Jae D. Chang, Sumin Kim,
Energy efficient concrete with n-octadecane/xGnP SSPCM for energy conservation in infrastructure,
Construction and Building Materials, 106, 543~549. (2016-03) LINK
2. Jeong-Hun Lee, Su-Gwang Jeong, Sumin Kim,
Performance Evaluation of Infrared Bake-Out for Reducing VOCs and Formaldehyde Emission in MDF Panels,
Bioresources, 11(1), 1214~1223. (2016-02) LINK
1. Su-Gwang Jeong, Seong Jin Chang, Seunghwan Wi, Yujin Kang, Sumin Kim,
Development and performance evaluation of heat storage paint with MPCM for applying roof materials as basic research,
Energy and Buildings, 112, 62~68. (2016-01) LINK
2015 (@SSU)
7. Yujin Kang, Su-Gwang Jeong, Seunghwan Wi, Sumin Kim,
Energy efficient Bio-based PCM with silica fume composites to apply in concrete for energy saving in buildings,
Solar Energy Materials and Solar Cells, 143, 430~434. (2015-12) LINK
6. Seunghwan Wi, Jungki Seo, Su-Gwang Jeong, Seong Jin Chang, Yujin Kang, Sumin Kim,
Thermal properties of shape-stabilized phase change materials using fatty acid ester and exfoliated graphite nanoplatelets for saving energy in buildings,
Solar Energy Materials and Solar Cells, 143, 168~173. (2015-12) LINK
5. Seong Jin Chang, Seunghwan Wi, Su-Gwang Jeong and Sumin Kim,
Evaluation of the Adsorption Performance and Sustainability of Exfoliated Graphite Nanoplatelets(xGnP) for VOCs,
Materials, 8, 7615~7621. (2015-11) LINK
4. Hyun Jeong Seo, Su-Gwang Jeong, Sumin Kim,
Development of Thermally Enhanced Wood-Based Materials with High VOCs Adsorption using Exfoliated Graphite Nanoplatelets for Use as Building Materials,
Bioresources, 10(4), 7081~7091. (2015-11) LINK
3. Su-Gwang Jeong, Seong Jin Chang, Seunghwan We, Sumin Kim,
Energy efficient thermal storage montmorillonite with phase change material containing exforliated graphite nanoplatelets,
Solar Energy Materials and Solar Cells, 139, 65~70. (2015-08) LINK
2. Junhyun Kim, Jeong-Hun Lee, Su-Gwang Jeong, Sumin Kim,
Formaldehyde emissions from particle board made with phenol-urea-formaldehyde resin prepared by different synthesis methods,
Journal of Adhesion Science and Technology, 29(19), 2090~2103. (2015-07) LINK
1. Okyoung Chung, Su-Gwang Jeong, Sumin Kim,
Preparation of energy efficient paraffinic PCMs/expanded vermiculite and perlite composites for energy saving in buildings,
Solar Energy Materials and Solar Cells 137, 107~112. (2015-06) LINK
2014 (@SSU)
9. Su-Gwang Jeong, Junghoon Cha, Sughwan Kim, Jungki Seo, Jeong-Hun Lee, Sumin Kim,
Preparation of thermal-enhanced epoxy resin adhesive with organic PCM for applying wood flooring,
Journal of Thermal Analysis and Calorimetry, 117(3), 1027~1034. (2014-09) LINK
8. Su-Gwang Jeong, Jeong-Hun Lee, Jungki Seo, Sumin Kim,
Thermal performance evaluation of Bio-based shape stabilized PCM with boron nitride for energy saving,
International Journal of Heat and Mass Transfer, 71, 245~250. (2014-04) LINK
7. Junghoon Cha, Sughwan Kim, Kyung-Won Park, Dong Ryeol Lee, Jae-Hun Jo, Sumin Kim,
Improvement of window thermal performance using aerogel insulation film for building energy saving,
Journal of Thermal Analysis and Calorimetry, 116(1), 219~224. (2014-04) LINK
6. Su-Gwang Jeong, Sumin Kim, Wansoo Huh,
Preparation of epoxy resin using nhexadecane based shape stabilized PCM for applying wood-based flooring,
Journal of Adhesion Science and Technology, 28(7), 711~721. (2014-04) LINK
5. Sughwan Kim, Songyee Paek, Su-Gwang Jeong, Jeong-Hun Lee, Sumin Kim,
Thermal performance enhancement of mortar mixed with octadecane/xGnP SSPCM to save building energy consumption,
Solar Energy Materials and Solar Cells, 122, 257~263. (2014-03) LINK
4. Sughwan Kim, Seong Jin Chang, Okyoung Chung, Su-Gwang Jeong, Sumin Kim,
Thermal characteristics of mortar containing hexadecane/xGnP SSPCM and energy storage behaviors of envelopes integrated with enhanced heat storage composites for energy efficient buildings,
Energy and Buildings, 70, 472~479. (2014-02) LINK
3. Okyoung Chung, Su-Gwang Jeong, Seulgi Yu, Sumin Kim,
Thermal performance of organic PCMs/micronized silica composite for latent heat thermal energy storage,
Energy and Buildings, 70, 180~185. (2014-02) LINK
2. Jungki Seo, Yoon Park, Junhyun Kim, Sughwan Kim, Sumin Kim, Jeong Tai Kim,
Comparison of thermal transfer characteristics of wood flooring according to the installation method,
Energy and Buildings, 70, 422~426. (2014-02) LINK
1. Seulgi Yu, Su-Gwang Jeong, Okyoung Chung, Sumin Kim,
Bio-based PCM/carbon nanomaterials composites with enhanced thermal conductivity,
Solar Energy Materials and Solar Cells 120, 549~554. (2014-01) LINK
2013 (@SSU)
13. Su-Gwang Jeong, Jisoo Jeon, Okyoung Chung, Sughwan Kim, Sumin Kim,
Evaluation of PCM/diatomite composites using exfoliated graphite nanoplatelets (xGnP) to improve thermal properties,
Journal of Thermal Analysis and Calorimetry, 114(2), 689~698. (2013-11) LINK
12. Su-Gwang Jeong, Okyoung Chung, Seulgi Yu, Sughwan Kim, Sumin Kim,
Improvement of the thermal properties of Bio-based PCM using exfoliated graphite nanoplatelets,
Solar Energy Materials and Solar Cells, 117, 87~92. (2013-10) LINK
11. Chang-Young Park, Chang-Ho Choi, Jeong-Hun Lee, Sumin Kim, Kyung-Won Park, Jeong Ho Cho,
Evaluation of formaldehyde emissions and combustion behaviors of wood-based composites subjected to different surface finishing methods,
Bioresources, 8(4), 5515~5523. (2013-08) LINK
10. Su-Gwang Jeong, Jisoo Jeon, Junghoon Cha, Junhyun Kim, Sumin Kim,
Preparation and evaluation of thermal enhanced silica fume by incorporating organic PCM, for application to concrete,
Energy and Buildings, 62, 190~195. (2013-07) LINK
9. Su-Gwang Jeong, Jisoo Jeon, Jeong-Hun Lee, Sumin Kim,
Optimal preparation of PCM/diatomite composites for enhancing thermal properties,
International Journal of Heat and Mass Transfer, 62, 711~717. (2013-07) LINK
8. Yeong Don Park, Keita Anabuki, Sumin Kim, Kyung-Won Park, Dong Hyun Lee, Soong Ho Um, Jooyong Kim, Jeong Ho Cho,
Fabrication of Stable Electrospun TiO2 Nanorods for High-Performance Dye-Sensitized Solar Cells,
Macromolecular Research, 21(6), 636~640. (2013-06) LINK
7. Junhyun Kim, Jeong-Hun Lee, Yoon-Ki Choi, Sumin Kim, Hyeun Jun Moon, Dong-Won Yoon,
Confirmation of the performance of exfoliated graphite nanoplatelets for pollutant reduction rate on wood panel,
Journal of Composite Materials, 47, 1039~1044. (2013-04) LINK
6. Janghoo Seo, Sunwoo Lee, Sumin Kim, Yujin Nam,
Control of emission rates of chemical compounds emitted by controlling their mass transfer coefficients on the surface of the tested building material,
Journal of Adhesion Science and Technology, 27(5-6), 610~619. (2013-03) LINK
5. Jong-Young Park, Sang-Min Lee, Byung-Dae Park, Jung-Yeon Lim, Sung-Gi Jang, Sumin Kim,
Effect of surface laminate type on the emission of volatile organic compounds from wood-based composite panels,
Journal of Adhesion Science and Technology, 27(5-6), 620~631. (2013-03) LINK
4. Sughwan Kim, Jungki Seo, Junghoon Cha, Sumin Kim,
Chemical retreating for gel-typed aerogel and insulation performance of cement containing aerogel,
Construction and Building Materials, 40, 501~505. (2013-03) LINK
3. Jeong-Hun Lee, Junhyun Kim, Sumin Kim, Jeong Tai Kim,
Thermal Extractor Analysis of VOCs Emitted from Building Materials and Evaluation of the Reduction Performance of Exfoliated Graphite Nanoplatelets,
Indoor and Built Environment, 22(1), 68~76. (2013-02) LINK
2. Jeong-Hun Lee, Junhyun Kim, Sumin Kim, Jeong Tai Kim,
Characteristics of Particleboards Using Tannin Resin as Novel Environment-Friendly Adhesion System,
Indoor and Built Environment, 22(1), 61~67. (2013-02) LINK
1. Jisoo Jeon, Jeong-Hun Lee, Jungki Seo, Su-Gwang Jeong, Sumin Kim,
Application of PCM thermal energy storage system to reduce building energy consumption,
Journal of Thermal Analysis and Calorimetry, 111(1), 279~288. (2013-01) LINK
2012 (@SSU)
6. Su-Gwang Jeong, Jisoo Jeon, Jungki Seo, Jeong-Hun Lee, Sumin Kim,
Performance evaluation of the microencapsulated PCM for wood-based flooring application,
Energy Conversion and Management, 64, 516~521. (2012-12) LINK
5. Jungki Seo, Junghoon Cha, Sumin Kim,
Enhancement of the thermal conductivity of adhesives for wood flooring using xGnP,
Energy and Buildings, 51, 153~156. (2012-08) LINK
4. Junghoon Cha, Jungki Seo, Sumin Kim,
Building materials thermal conductivity measurement and correlation with heat flow meter, laser flash analysis and TCi,
Journal of Thermal Analysis and Calorimetry, 109(1), 295~300. (2012-07) LINK
3. Jisoo Jeon, Su-Gwang Jeong, Jeong-hun Lee, Sumin Kim,
High thermal performance composite PCMs loading xGnP for application to building using radiant floor heating system,
Solar Energy Materials and Solar Cells, 101, 51~56. (2012-03) LINK
2. Jeong-Hun Lee and Sumin Kim,
The determination of the absorption performance of graphite for VOCs and formaldehyde,
Energy and Buildings, 46, 56~61. (2012-03) LINK
1. Jin-A Kim Sumin Kim, Hyun-Joong Kim, Janghoo Seo,
Measurements of Formaldehyde and TVOC Emission from Paints and Coating Materials using Small Chamber Method for Building Composites,
Journal of Wuhan University of Technology-Materials Science Edition, 27(1), 120~125. (2012-02) LINK
2011 (@SSU)
5. Jungki Seo, Jisoo Jeon, Jeong-Hun Lee, Sumin Kim,
Thermal performance analysis according to wood flooring structure for energy conservation in radiant floor heating systems,
Energy and Buildings, 42, 2039~2042. (2011-08) LINK
4. Ki-Wook Kim, Byoung-Ho Lee, Sumin Kim, Hyun-Joong Kim, Ju-Ho Yun, Seung-Eul Yoo, Jong Ryeul Sohn,
Reduction of VOC emission from natural flours filled biodegradable bio-composites for automobile interior,
Journal of Hazardous Materials, 187(1-3), 37~43. (2011-03) LINK
3. Jae-Yoon An, Sumin Kim, Hyun-Joong Kim,
Formaldehyde and TVOC emission behavior of laminate flooring by structure of laminate flooring and heating condition,
Journal of Hazardous Materials, 187(1-3), 44~51. (2011-03) LINK
2. Jin-A Kim, Sumin Kim, Hyun-Joong Kim, Yong-Shik Kim,
Evaluation of formaldehyde and VOCs emission factors from paints in a small chamber : The effects of preconditioning time and coating weight,
Journal of Hazardous Materials, 187(1-3), 52~57. (2011-03) LINK
1. Ki-Wook Kim, Hyun-Joong Kim, Sumin Kim, Yoon-Ki Choi, Kyung-Won Park, Jeong Ho Cho, Jin Chul Park,
Application of Plywood with Water-Based Phenol-Formaldehyde Resin Impregnated Linerboards as Formwork for Concrete Structure,
Journal of Adhesion Science and Technology, 25(1-3), 169~178. (2011-01) LINK
2010 (@SSU)
8. Sumin Kim,
The reduction of formaldehyde and VOCs emission from wood-based flooring by green adhesive using cashew nut shell liquid (CNSL),
Journal of Hazardous Materials, 182(1-3), 919~922. (2010-10) LINK
7. Jae-Yoon An, Sumin Kim, Hyun-Joong Kim, Janghoo Seo,
Emission behavior of formaldehyde and TVOC from engineered flooring in under heating and air circulation systems,
Building and Environment, 45(8), 1826~1833. (2010-08) LINK
6. Ki-Wook Kim, Sumin Kim, Moon Jae Park, Hyun-Joong Kim, Jin Chul Park,
Characteristics of a Reddish Residual Soil (Hwangtoh) finishing material with water-soluble adhesive for residential building,
Construction and Building Materials, 24(8), 1542~1546. (2010-08) LINK
5. Sumin Kim, Inhwan Do, Lawrence T Drzal,
Thermal stability and dynamic mechanical behavior of exfoliated graphite nanoplatelets-LLDPE nanocomposites,
Polymer Composites, 31(5), 755~761. (2010-05) LINK
4. Sumin Kim, Jungki Seo, Lawrence T Drzal,
Improvement of electric conductivity of LLDPE based nanocomposite by paraffin coating on exfoliated graphite nanoplatelets,
Composites Part A: Applied Science and Manufacturing, 41(5), 581~587. (2010-05) LINK
3. Ki-Wook Kim, Sumin Kim, Hyun-Joong Kim, Jin Chul Park,
Formaldehyde and TVOC emission behaviors according to finishing treatment with surface materials using 20 L chamber and FLEC,
Journal of Hazardous Materials, 177(1-3), 90~94. (2010-05) LINK
2. Sumin Kim and Jin Chul Park,
Environment-friendly Hwangtoh Composite Materials Using Water Soluble Resin for Indoor Air Quality and Human Health,
Journal of Composite Materials, 44(8), 905~913. (2010-04) LINK
1. Sumin Kim
Control of formaldehyde and TVOC emission from wood-based flooring composites at various manufacturing processes by surface finishing,
Journal of Hazardous Materials, 176(1-3), 14~19. (2010-04) LINK
2009 (@SSU)
6. Sumin Kim and Lawrence T Drzal,
Comparison of Exfoliated graphite nanoplatelets (xGnP) and CNTs for reinforcement of EVA nanocomposites fabricated by solution compounding method and various screw rotating systems,
Journal of Adhesion Science and Technology, 23(12), 1623~1638. (2009-11) LINK
5. Sumin Kim,
The reduction of indoor air pollutant from wood-based composite by adding pozzolan for building materials,
Construction and Building Materials, 23(6), 2319~2323. (2009-05) LINK
4. Sumin Kim, Inhwan Do, Lawrence T Drzal,
Multifunctional exfoliated graphite nanoplatelets-LLDPE nanocomposites fabricated by solution compounding method and various screw rotating systems,
Macromolecular Materials and Engineering, 294(3), 196~205. (2009-03) LINK
3. Sumin Kim,
Incombustibility, physico-mechanical properties and TVOC emission behavior of the gypsum-rice husk boards for wall and ceiling materials in the housing,
Industrial Crops and Products, 29(2-3), 381~387. (2009-03) LINK
2. Sumin Kim and Lawrence T Drzal,
High latent heat storage and high thermal conductive phase change materials using exfoliated graphite nanoplatelets,
Solar Energy Materials and Solar Cells 93(1), 136~142. (2009-01) LINK
1. Sumin Kim,
Environment-friendly adhesives for surface bonding of wood-based flooring using natural tannin to reduce formaldehyde and TVOC emission,
Bioresource Technology, 100(2), 744~748. (2009-01) LINK
2008 (@SSU)
1. Sumin Kim, Hee-Soo Kim, Hyun-Joong Kim, Han-Seung Yang,
Fast curing PF resin mixed with various resins and accelerators for building composite materials,
Construction and Building Materials, 22(10), 2141~2146. (2008-10) LINK
2007 (@Michigan State)
10. Sumin Kim, Jin-A Kim, Jae-Yoon An, Hee-Soo Kim, Hyun-Joong Kim, Yuhe Deng, Qian Feng, Jiayan Luo,
Physico-Mechanical Properties and the TVOC Emission Factor of Gypsum Particleboards Manufactured with Pinus Massoniana and Eucalyptus Sp.,
Macromolecular Materials and Engineering, 292(12), 1256~1262. (2007-12) LINK
9. Sumin Kim, Jin-A Kim, Jae-Yoon An, Hyun-Joong Kim, Jin-Chul Park, Shin-Do Kim,
TVOC and formaldehyde emission behaviors from flooring materials bonded with environmental-friendly MF/PVAc hybrid resins,
Indoor Air, 17(5), 404~415. (2007-10) LINK
8. Hee-Soo Kim, Seung-Woo Cho, Byoung-Ho Lee, Sumin Kim, Hyun-Joong Kim, Chae-Wook Cho, Dong-Hwan Cho,
Thermal properties of bio flour-filled polypropylene bio-composites with different pozzolan contents,
Journal of Thermal Analysis and Calorimetry, 89(3), 821~827. (2007-09) LINK
7. Han-Seung Yang, Michael P Wolcott, Hee-Soo Kim, Sumin Kim, Hyun-Joong Kim,
Effect of different compatibilizing agents on the mechanical properties of lignocellulosic material filled polyethylene bio-composites,
Composite Structures, 79(3), 369~375. (2007-07) LINK
6. Hee-Soo Kim, Sumin Kim, Byoung-Ho Lee, Seung-Woo Choi, Hyun-Joong Kim, Seung-Bae Yoon, Jeong-Moon Seo,
The Effect on Interfacial Adhesion of Bio-Flour-Filled Polypropylene Bio-Composites as Different Maleic Anhydride-grafted Polypropylene (MAPP) Types,
Composites Part A: Applied Science and Manufacturing, 38(6), 1473~1482. (2007-06) LINK
5. Jong-Sung Kim, Young Geun Eom, Sumin Kim, Hyun-Joong Kim,,
Effects of natural-resource-based scavengers on the adhesion properties and formaldehyde emission of engineered flooring,
Journal of Adhesion Science and Technology, 21(3-4), 211~226. (2007-03) LINK
4. Sumin Kim and Hyun-Joong Kim,
Miscibility and phase morphology of MF/PVAc hybrid resins for surface bonding of building interior materials,
Macromolecular Materials and Engineering, 292(3), 339~346. (2007-03) LINK
3. Birm-June Kim, Sung-Eun Kim, Hyun-Sung Do, Sumin Kim, Hyun-Joong Kim,
Probe tack of tackified acrylic emulsion PSAs,
International Journal of Adhesion and Adhesives, 27(2), 102~107. (2007-03) LINK
2. Qian Feng, Yuhe Deng, Hyun-Joong Kim, Wen Lei, Zhiwu Sun, Yonggang Jia, Lin Xuan, Sumin Kim,
Observation and analysis of gypsum particleboard using SEM,
Journal of Wuhan University of Technology-Materials Science Edition, 22(1), 44~47. (2007-02) LINK
1. Birm-June Kim, Sumin Kim, Sung-Eun Kim, Hyun-Joong Kim, Shin Do Kim,
Viscoelastic properties and peel strength of water-borne acrylic PSAs for labels,
Journal of Adhesion Science and Technology, 21(2), 109~123. (2007-02) LINK
2006 (@SNU)
15. Hee-Soo Kim, Sumin Kim, Hyun-Joong Kim, Han-Seung Yang,
Thermal properties of bio-flour-filled polyolefin composites with different compatibilizing agent type and content,
Thermochimica Acta, 451(1-2), 181~188. (2006-12) LINK
14. Sumin Kim, Hyun-Joong Kim, Suck-Joong Moon,
Evaluation of VOC emissions from building finishing materials using a small chamber and VOC analyser,
Indoor and Built Environment, 15(6), 511~523. (2006-12) LINK
13. Sumin Kim, Jin-A Kim, Jae-Yoon An, Hyun-Joong Kim, Suck-Joong Moon,
Development of a test method using a VOC analyzer to measure VOC emission from adhesives for building materials,
Journal of Adhesion Science and Technology, 20(15), 1783~1799. (2006-11) LINK
12. Hee-Soo Kim, Sumin Kim, Hyun-Joong Kim, Hak-Gyeom Kim,
Physico-Mechanical Properties, Odor and VOC Emission of Bio-Flour-Filled Poly(propylene) Bio-Composites with Different Volcanic Pozzolan Contents,
Macromolecular Materials and Engineering, 291(10), 1255~1264. (2006-10) LINK
11. Sumin Kim, Jin-A Kim, Hyun-Joong Kim, Hwa Hyoung Lee, Dong-Won Yoon,
The effects of edge sealing treatment applied to wood-based composites on formaldehyde emission by desiccator test method,
Polymer Testing, 25(7), 904~911. (2006-10) LINK
10. Young-Wook Song, Hyun-Sung Do, Hyo-Sook Joo, Dong-Hyuk Lim, Sumin Kim, Hyun-Joong Kim,
Effect of grafting of acrylic acid onto PET film surfaces by UV irradiation on the adhesion of PSAs,
Journal of Adhesion Science and Technology, 20(12),1357~1365. (2006-10) LINK
9. Sumin Kim, Hyun-Joong Kim, Hee-Soo Kim, Hwa Hyoung Lee,
Effect of bio-scavengers on the curing behavior and bonding properties of melamine-formaldehyde resins,
Macromolecular Materials and Engineering, 291(9), 1027~1034. (2006-09) LINK
8. Han-Seung Yang, Michael P Wolcott, Hee-Soo Kim, Sumin Kim, Hyun-Joong Kim,
Properties of lignocellulosic material filled polypropylene bio-composites made with different manufacturing processes,
Polymer Testing, 25(5), 668~676. (2006-08) LINK
7. Sumin Kim, Jin-A Kim, Hyun-Joong Kim, Shin-Do Kim,
Determination of formaldehyde and TVOC emission factor from wood-based composites by small chamber method,
Polymer Testing, 25(5), 605~614. (2006-08) LINK
6. Hee-Soo Kim, Sumin Kim, Hyun-Joong Kim,
Enhanced interfacial adhesion of bioflour-filled poly(propylene) biocomposites by electron-beam irradiation,
Macromolecular Materials and Engineering, 291(7), 762~772. (2006-07) LINK
5. Sumin Kim, Hee-Soo Kim, Hyun-Joong Kim, Young-Kyu Lee, Han-Seung Yang,
Thermal analysis study of viscoelastic properties and activation energy of melamine-modified urea-formaldehyde resins,
Journal of Adhesion Science and Technology, 20(8), 803~816. (2006-06) LINK
4. Sumin Kim and Hyun-Joong Kim,
Initial tack and viscoelastic properties of MF/PVAc hybrid resins used as adhesives for composite flooring materials,
Journal of Adhesion Science and Technology, 20(7), 705~722. (2006-05) LINK
3. Sumin Kim and Hyun-Joong Kim,
Thermal stability and viscoelastic properties of MF/PVAc hybrid resins on the adhesion for engineered flooring in under heating system; ONDOL,
Thermochimica Acta, 444(2), (2006-05) LINK
2. Sumin Kim and Hyun-Joong Kim,
Anti-bacterial performance of colloidal silver-treated laminate wood flooring,
International Biodeterioration & Biodegradation, 57(3), 155~162. (2006-04) LINK
1. Sumin Kim and Hyun-Joong Kim,
Study of Miscibility of melamine-formaldehyde resin and poly(vinyl acetate) for adhesive in engineered flooring,
Journal of Adhesion Science and Technology, 20(2-3), 209~219. (2006-03) LINK
2005 (@SNU)
3. Sumin Kim and Hyun-Joong Kim,
Comparison of formaldehyde emission from building finishing materials at various temperatures in under heating system; ONDOL,
Indoor Air, 15(5), 317~325. (2005-10) LINK
2. Sumin Kim, Hyun-Joong Kim,
Effect of addition of polyvinyl acetate to melamine-formaldehyde resin on the adhesion and formaldehyde emission in engineered flooring,
International Journal of Adhesion and Adhesives 25(5); 456~461, (2005-10) LINK
1. Sumin Kim, Hyun-Joong Kim,
Comparison of standard methods and gas chromatography method in determination of formaldehyde emission from MDF bonded with formaldehyde-based resins,
Bioresource Technology 96(13); 1457~1464, (2005-09) LINK
2004 (@SNU)
1. Sumin Kim, Hyun-Joong Kim,
Evaluation of formaldehyde emission of pine and wattle tannin-based adhesives by gas chromatography,
Holz als Roh- und Werstoff 62(2); 101~106, (2004-04) LINK
2003 (@SNU)
2. Sumin Kim, Young-Kyu Lee, Hyun-Joong Kim, Hwa Hyoung Lee,
Physico-mechanical properties of particleboards bonded with pine and wattle tannin-based adhesives,
Journal of Adhesion Science and Technology 17(14); 1863~1875, (2003-10) LINK
1. Sumin Kim, Hyun-Joong Kim,
Curing behavior and viscoelastic properties of pine and wattle tannin-based adhesives studied by dynamic mechanical thermal analysis and FT-IR-ATR spectroscopy,
Journal of Adhesion Science and Technology 17(10); 1369~1383, (2003-08) LINK

Building Environment and Materials Lab


TEL   +82-2-2123-2782

EMAIL   kimsumin@yonsei.ac.kr

ADDRESS   Building Environment and Materials Lab, Engineering Hall A576, Yonsei University 50 Yonsei-ro, Seodaemun-gu, Seoul 03722, South Korea